Acoustic Cladding
| Maximum length | 9.600 mm |
| Useful width | 1.000 mm |
| Thicknesses | 40, 50, 60, 80, 100, 120 or 150 mm |
| Insulating Core | Rockwool Lamela M with a density of 100 kg/m3 |
| Fire rating | A2-s1, d0 fire classification, REI certificate available upon request |
| Stock | No stock |
Self-supporting Sandwich Panel for Roofing with a lateral overlap wing, featuring an exterior finish with 5 grooves and a lateral wing overlap over the groove; and an interior finish with perforated sheeting with an R3T5 pattern.
The new 5G Acoustic Sandwich Panel by PRONTOPANEL is composed of an exterior steel sheet with pre-coated finish, profiled with 5 grooves (one empty) and ribbed in the inter-groove area, providing it with high mechanical strength, particularly suitable for large spans between supports. Inside, it contains a fire-resistant core of rock wool, providing excellent thermal and acoustic insulation to the panel. The bottom is finished with a perforated pre-coated steel sheet, providing excellent sound absorption of interior noise and serving as the interior finishing surface. At the lateral joint between panels, the empty corrugation (wing) is placed over the filled corrugation of the adjacent panel, and both are fixed in place, leaving the fastening visible. This type of overlap provides greater waterproofing security for the roof and simplifies the installation with fewer auxiliary elements.
These properties allow the insulated panel with a lateral overlap to be used as an alternative to other types of ceilings with acoustic properties, offering multiple advantages such as:
- Simplicity and speed in installation (there is no need to create multiple functional layers to build the roof).
- Ability to attenuate noise with a single element.
- Optimization of the supporting structure, as they are designed for large distances between purlins.
- Lightweight system that allows for significant weight savings in the design of supporting structures, providing additional cost savings.
- Improved tightness and resistance to moisture, as the panels have double protection with a tight joint at the union and an overlapping finish that conceals this joint from the exterior. Furthermore, since the exterior and interior sheets are not moisture-absorbent, the appearance of stains on the interior surface of the ceiling is eliminated.
- Customized solution for all roof finishes such as edges, gutters, ridges, and valleys, etc., which, in traditional roofs, often require on-site finishing that is sometimes poorly executed.
The PRONTOPANEL 5G Acoustic Sandwich Panel or Acoustic Insulated Panel is ideal for roof solutions in commercial, sports, industrial, or agricultural buildings that, due to their activity, require noise attenuation inside.
The interior sheet of the panel, perforated with an R3T5 pattern, has the property of absorbing the sound waves it receives. This reduces or eliminates the reverberations and echoes that various sources of noise inside the building may produce, thus contributing to a reduction in the overall sound level. This is a typical case in large warehouses with various noisy machines scattered in some of their work areas, or in large public gathering halls with sound systems. In the latter case, it would improve the sound quality of the room.
In addition to the previous property, it is worth adding the great sound insulation capacity of Rockwool, so it also provides good noise insulation properties towards the exterior of buildings or premises.
The PRONTOPANEL 5G Acoustic Sandwich Panel is installed easily by mounting the panel alongside the previous panel so that the panel’s extreme wing mounts over the previous panel’s rib. Next, the fastening is executed through both panels. Optionally, a specific washer or capellotti can be used to further enhance the already good sealing of the system.
In the case of long eaves, it is possible to install panels in multiple sections along the length of the eave. To do this, you will need to request that some of the panels have a lap tab. First, install the downstream panel, and then place the upstream panel with the lap tab so that it overlaps a portion of the downstream panel, creating an overlapping zone between the two. There is the possibility of supplying panels with longitudinal overlap upon request. Consult our installation manual available on this page.
For installation, auxiliary elements will be required for fastening, sealing, and finishing your roof. You can refer to the ‘Finishes and Accessories’ section for more details. For more information, consult the manual or send us your inquiry without obligation, and we will study the optimal solution for your roof.
The PRONTOPANEL 5G Acoustic Sandwich Panel can be supplied in lengths of up to 9.60 meters.
We have the same panel available in various thicknesses ranging from 40 to 150 mm. This way, we can adapt to the different needs for noise attenuation, sound insulation, and fire resistance required by the customer.
Exterior and interior finish available in a wide range of colors.
Upon inquiry, it is possible to supply panels with longitudinal overlap directly from the factory.
TORNILLO
El tornillo especial para panel sándwich es autotaladrante, por lo que no es preciso realizar taladros previos sobre el panel o la estructura portante. Incluye una arandela específica que garantiza la estanqueidad en la zona de fijación una vez ejecutada correctamente.
CAPELOTI
Arandela en chapa prelacada, disponible en vios colores, con junta inferior de EPDM. Su función es la de mejorar la estanqueidad y repartir la presión de fijación sobre la cabeza de la greca.
CUMBRERA DOBLE TAP
Se instala en el caballete de una cubierta a dos aguas, su diseño en dos mitades permite un ajuste perfecto sea cual sea la inclinación del tejado. El extremo troquelado no deja espacios para que penetre el aguaviento al interior del edificio.
CORONACIÓN TRASERA TAP
Consiste en un remate de unión de cumbrera con pared vertical por debajo o piñón, y combina un extremo troquelado con otro vertical. Permite el correcto sellado de la cubierta y presenta un acabado limpio en la coronación de la fachada.
FALDON TRASERO TAP
Consiste en un remate de unión de cumbrera con pared vertical por encima o vierteaguas, y combina un extremo troquelado con otro vertical. Permite el correcto sellado de la cubierta y acomete contra pared existente que requerirá, según el tipo de pared, un sellado cuidadoso para evitar entrada de agua y humedades al interior del edificio.
CORONACIÓN LATERAL TAP
Este remate oculta y protege los acabados laterales del panel sándwich instalado en la cubierta, a la vez que da un acabado limpio a la fachada vertical lateral hacia abajo. Los solapes contra cubierta y fachada garantizan la entrada de aguaviento al interior del edificio.
FALDÓN LATERAL TAP
Consiste en un remate de unión de lateral de cubierta con pared vertical por encima o vierteaguas, y combina un solape sobre cubierta con otro vertical a pared. Permite el correcto sellado de la cubierta y acomete contra pared existente que requerirá, según el tipo de pared, un sellado cuidadoso para evitar entrada de agua y humedades al interior del edificio.
LATERAL VUELO TAP
Este remate se dispone en la parte baja del faldón y su función es recoger las aguas de la cubierta para canalizarlas y, al mismo tiempo, dar un acabado limpio al borde del faldón y proteger la espuma de poliuretano de las inclemencias.
CANALON TAP
Este remate se dispone en la parte baja del faldón y su función es recoger las aguas de la cubierta para canalizarlas y, al mismo tiempo, dar un acabado limpio al borde del faldón y proteger la espuma de poliuretano de las inclemencias.
TAPA CANALÓN
Tapadera adaptada a CANALÓN TAP, se colocará en los extremos del ancho total de la cubierta.
FRONTAL TAP
Cuando no es necesaria la instalación de canalón, es conveniente ocultar la parte del núcleo de poliuretano para evitar su deterioro, además de aportar una estética adecuada de terminación de cubierta. Esta es la función de este remate fabricado a medida para adaptarse óptimamente a la geometría del panel sándwich TAP.
OMEGAS METÁLICAS
Cuando la instalación se realiza sobre una superficie ya existente como, una cubierta de placas o un faldón de mortero o madera, es conveniente utilizar este perfil entre las dos superficies para que la unión al paño inferior sea con las fijaciones adecuadas y la unión del panel a la omega sea con su tornillería exclusiva.