Inicio / Corrugated compact
Corrugated compact
Maximum length | 12.000 mm |
Useful width | 1.000 mm |
Thicknesses | 0.8 – 1.2 mm |
Material | Polycarbonate |
Fire rating | B s1, d0 |
Stock | Esp. 0.8 mm; Long. 7 m. |
Translucent corrugated compact panel with corrugated or grooved geometries for multi-purpose use in roofs, facades, and partitions.
The new PRONTOPANEL CORRUGATED COMPACT Panel is a thin, compact panel profiled in various grooved or corrugated geometries to adapt to the geometries of various profiled sheet manufacturers so that they can overlap in intercalated skylights.
These properties allow the CORRUGATED COMPACT panel to be used in multiple applications, such as continuous skylights or in combination with profiled sheet cladding.
The CORRUGATED COMPACT Panel or corrugated sheet from PRONTOPANEL is ideal for solutions in greenhouses, roofs, ceilings, or partitions as a very cost-effective solution, allowing for slightly curved roof solutions.
Another option is to use it as a solution for small-scale construction, DIY, or do-it-yourself projects for building enclosures in sheds, pergolas, porches, parking areas, and garages.
The CORRUGATED COMPACT Panel is installed in sections of no more than 7 meters in length, overlapping the wave or rib of the previously installed panel. In facade solutions, it allows for both vertical and horizontal installation.
Consult our installation manual available on this page.
For the installation, auxiliary elements may be necessary for fastening, sealing, and finishing your facade, which you can inquire about below. For more information, please refer to the manual or feel free to contact us with your inquiry, and we will evaluate the optimal solution for your roof without obligation.
The PRONTOPANEL CORRUGATED COMPACT Panel offers the best price for the best solution for your skylight, and can be supplied up to a maximum length of 12,000mm. We have stock lengths available up to 7,000mm.
Available in thicknesses ranging from 0.8 to 1.2 mm depending on the model. Available for immediate supply in 0.8mm
Finished in Glass or Opal Available in stock.
Diverse geometries available, please consult the catalog. In stock: WAVE 18/76 and FRET 32/200.
OMEGAS METÁLICAS
Cuando la instalación se realiza sobre una superficie ya existente como, una fachada de placas o un paño de mortero o madera, es conveniente utilizar este perfil entre las dos superficies para que la unión al paño inferior sea con las fijaciones adecuadas y la unión del panel a la omega sea con su tornillería exclusiva.